Safety Razors 101: Save Money and Cut Bathroom Waste

Safety Razors 101: Save Money and Cut Bathroom Waste

If your bathroom bin fills up with plastic razor cartridges faster than almost anything else, you are not imagining it. Disposable razors and cartridge heads are one of the hardest bathroom items to recycle, and they add up fast. This safety razor guide walks you through what a safety razor actually is, why so many Calgary households are making the switch, and exactly how to shave with one so your first time feels easy instead of intimidating.

The short version: a safety razor is a simple, durable metal razor that uses a single flat blade you can replace on its own. One razor can last for years, and the blades themselves are small, inexpensive, and made of recyclable steel rather than fused plastic and metal. It is one of the most satisfying low-waste swaps you can make, because it saves money and cuts plastic at the same time.

What is a safety razor (and why people are switching)

A safety razor has been around for well over a century. It is a weighted handle with a head that holds one double-sided blade, protected by a guard so only a safe amount of the edge is exposed - that guard is where the name comes from. You unscrew the top, drop in a fresh blade, and screw it back together.

Modern disposable and cartridge razors are built from moulded plastic bonded to several thin blades. Because the materials are fused, they cannot be separated for recycling, so almost every one ends up in the landfill. A safety razor flips that equation. The handle is a one-time purchase you keep, and the only thing you replace is a flat steel blade.

People make the switch for three honest reasons:

  • Less waste. You stop sending plastic cartridges to the bin every few weeks.
  • Lower cost over time. Replacement blades cost a fraction of what cartridge refills do, so the razor pays for itself.
  • A closer, simpler shave. A single sharp blade on a weighted handle often gives a smoother result once you get the hang of it.

How a safety razor cuts waste and cost

Here is the part that surprises most people. A quality safety razor is essentially a buy-it-once item. Treated well, the handle can last a decade or longer, which means a single razor can replace dozens of plastic cartridges over its life.

The blades tell a similar story. Double-edged blades are sold in simple paper or cardboard packets, they are cheap, and they are made of steel that can be recycled once you collect enough of them safely. Compared with buying a new pack of plastic cartridge heads every month or two, the running cost is dramatically lower. We are not going to invent a precise dollar figure for you, because prices change and everyone shaves at a different pace, but the direction is clear: you spend less, and you throw away far less plastic.

If you have been following our other low-waste bathroom swaps, a safety razor fits right alongside bar soap and refillable bottles as one of those changes you make once and barely think about again.

How to shave with a safety razor, step by step

The number one thing to know: a safety razor is not harder to use, it is just different. Cartridge razors are designed to be dragged with pressure. A safety razor works best when you let the weight of the handle and the sharpness of the blade do the work. Once that clicks, it feels effortless.

1. Prep your skin

Shave at the end of a warm shower or after a few minutes with a warm, damp cloth on the skin. Warm water softens the hair and opens things up, which matters even more in a dry Calgary winter when skin is already tight. Never dry shave with a safety razor.

2. Build a real lather

Use a proper shave soap or a gentle bar soap and work up a slick, cushioning lather. This is also where Calgary's hard water earns a mention: our mineral-heavy water can make soap harder to lather, so take an extra few seconds to work it up, and consider a soap that performs well in hard water. A good layer of lather is what lets the blade glide instead of scrape.

3. Mind your angle

Hold the razor so the handle sits at roughly a 30-degree angle to your skin. Too flat and the blade will not cut; too steep and it can nick. Start shallow and adjust.

4. Use no pressure

This is the golden rule. Rest the razor on your skin and guide it with short strokes, letting the weight of the head do the cutting. Pressing down is the most common beginner mistake and the usual cause of nicks.

5. Go with the grain first

Shave in the direction your hair grows for your first few passes. Rinse the blade often. If you want a closer finish, re-lather and make a second light pass across the grain rather than fighting a single aggressive one.

6. Rinse, dry, and soothe

Rinse with cool water, pat dry, and follow with a simple, fragrance-light moisturiser or balm - especially useful here, where winter air leaves skin dry and reactive. Letting the razor dry fully between uses keeps the blade sharp for longer.

Choosing your first safety razor

You do not need the fanciest option to start. A few things genuinely matter:

  • Weight and balance. A little heft helps, because the weight does the work for you.
  • Closed comb vs open comb. A closed comb (a straight safety bar under the blade) is more forgiving and the right choice for a first razor. Open combs are for experienced shavers.
  • Handle length and grip. A longer, textured handle is easier to control, particularly for legs.
  • Blade availability. Standard double-edged blades fit almost every safety razor, so you are never locked into one brand - a refreshing change from proprietary cartridges.

Buy a small variety pack of blades to begin with. Blades differ in sharpness and smoothness, and the one your skin likes is a personal thing, so trying a few is the fastest way to find your favourite.

Blades: storing and disposing of them safely

Used blades are sharp and should never go loose into your bin or your recycling cart, where they can injure sanitation workers. The simple, universal solution is a blade bank: a small tin or container with a slot where you drop each used blade. Many people simply repurpose a clean metal tin.

Once your blade bank is full after a year or two, keep it sealed and take the whole thing to a facility that accepts scrap metal, or follow the City of Calgary's current guidance for sharps and metal, which is worth a quick check since municipal rules are updated from time to time. The key point is that the steel is genuinely recyclable - it just needs to be collected safely first, not tossed loose.

Building a low-waste shave routine

A safety razor works best as part of a small, simple routine rather than on its own. Three supporting pieces make the whole thing feel good:

  • A cushioning natural bar soap to build lather without the foaming cans and plastic canisters.
  • A gentle post-shave moisturiser from our clean beauty and skincare range to calm skin after a pass, which your face and legs will thank you for in winter.
  • The rest of a plastic-free setup, which you can round out from our bath and body collection as you gradually phase out single-use items.

You do not have to overhaul everything at once. Start with the razor, add a bar soap next, and let the habit build from there. That slow, no-pressure approach is exactly how most low-waste swaps actually stick.

Frequently asked questions

Are safety razors hard to use for beginners?

No - they are just different. The adjustment is learning to use no pressure and to hold the blade at about a 30-degree angle. Most people feel comfortable within a handful of shaves. Start slow, go with the grain, and you will get there quickly.

Do safety razors save money?

Over time, yes. The handle is a one-time purchase that can last for years, and replacement blades cost far less than plastic cartridge refills. The razor typically pays for itself, though exactly how fast depends on how often you shave.

Can you use a safety razor on your legs and body?

Absolutely. A safety razor works well on legs, underarms, and the body. A longer handle gives you more control over curves, and the same no-pressure, with-the-grain technique applies everywhere.

How do I recycle used double-edged blades?

Collect them in a sealed blade bank or small metal tin so they are never loose, then take the full container to a scrap-metal facility or follow your local municipal guidance for sharps and metal. In Calgary, check the City's current rules, since they are updated periodically.

How often do I change the blade?

It varies with your hair and how often you shave, but many people get roughly a week or more from a single blade. You will feel it start to tug when it is time to swap - fresh blades are cheap, so there is no reason to push a dull one.

Ready to make the switch?

Switching to a safety razor is one of those rare swaps that is better for your wallet and your bin at the same time, with a closer shave as a bonus. Start with the razor, pair it with a good lathering soap, and keep a little balm on hand for after. When you are ready to round out your plastic-free bathroom, browse our bath and body collection and build your routine one easy swap at a time.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.